In this post, we’ll show you all the essential steps to properly set up and connect the Toner TW820 Wireless Microphone System. There’s more to this system than the documentation covers, so we’re breaking it down from start to finish to ensure you get the best sound possible from your wireless microphone.
What’s Included With The Tonor TW820?
Here is what you’ll find bundled with the Toner TWW 820 system:
- Toner TWW 820 Double Microphone Receiver
- 2 x Wireless Handheld Microphones (Transmitters)
- 2 x Foam Windscreens
- 1 x 6′ 1/4″ Cable
- 2 x Rubber Bumpers
Setting Up the Receiver
Antenna Orientation
Your receiver comes with two attached antennas. Ideal orientation is crucial for optimal signal reception:
- 45° Angle: Position each antenna at a 45° angle from the unit, forming a ‘V’ shape. Avoid crossing, pointing straight up, or out to the side.
Powering Up the Receiver
Next, connect the power cable and turn on the receiver. Upon powering up, you’ll notice the group and channel display:
- Default Group: Group 0
- Channels: Range from 0 to 20
Microphones should be in the same group but with different channels to avoid frequency interference.
Monitoring Signals
The receiver displays:
- RF (Radio Frequency): Indicates if the frequency is already in use (RF meter spikes are high).
- AF (Audio Frequency): Shows the signal strength.
Microphone Setup
Pairing The Microphones
- Turn Off both microphone and receiver.
- Hold High/Low Button and turn on the microphone simultaneously.
- Search for Receiver: The microphone will search for the receiver once the display flashes.
- Turn On Receiver: Upon connection, pair the microphone and adjust to preferred channels (e.g., Channel 2).
Changing Microphone Frequency
- Turn On the microphone.
- Match Frequencies: Ensure the displayed frequency (e.g., 93.6) on both the microphone and receiver match. If needed, change the channel using the high/low button under the microphone cap.
Connecting to an Audio Mixer
Output Options
- 1/4″ Output (Mix Output): Uses a single cable but is unbalanced, potentially picking up interference over longer distances.
- XLR Outputs (Balanced): Preferred for better control and distance handling.
Connecting XLR Cables
- Connect XLR Cable: From the receiver’s balanced output (Channel A) to the first channel on the audio mixer.
- Repeat for the second microphone, connecting from Channel B on the receiver to the second channel on the audio mixer.
Adjusting Audio Levels
Setting Levels on the Mixer
- Level Knob: Turn up to the triangle or zero (Unity) mark.
- Preamp Adjustment: Aim to regularly hit 0 dB at the loudest point without distortion.
Enhancing Audio Quality
- EQ Adjustments: Modify highs and lows to tailor the sound.
- Add Effects: Apply reverb or other effects uniquely to each microphone.
Troubleshooting Sound Issues
Handling Plosives
- Use Foam Windscreen: Reduces air blasts from ‘P’ and ‘B’ sounds.
Addressing Hiss
- Background Hiss: Not eliminated by the receiver but manageable within the context of home use.
Tonor TW820 Review
The Toner TWW 820 offers excellent value for home events, karaoke parties, and casual use. However, it’s not recommended for professional environments like conferences, weddings, or house of worship services due to its limitations in sound clarity and handling environments with complex frequency coordination.
With proper setup, the Toner TWW 820 Wireless Microphone System can significantly enhance your home audio experiences.
For questions or pricing information, check the links provided.
Tonor TW820 Pricing
- Tonor TW820: https://currentprice.io/tw820
- Rode NT1: https://currentprice.io/rode_nt1
- Yamaha MG06X: https://currentprice.io/mg06x
- Rode NTH-100 Headphones: https://currentprice.io/nth-100
- XLR Cable: https://currentprice.io/xlr_cable
- Mic Stand: https://currentprice.io/desk_stand
- Rode PSA1+ Boom Arm: http://currentprice.io/psa1_plus
- Quality Acoustic Treatment Panels: http://currentprice.io/soundpanels
Tonor TW820 Microphone Topics
- 0:00 – Introduction
- 0:22 – Equipment Setup
- 0:42 – Pricing & Specs
- 0:55 – What’s Included
- 1:20 – Antenna Setup
- 1:44 – Turn The Receiver On
- 2:01 – Receiver Overview
- 3:02 – Turn Microphone On
- 3:21 – Change Microphone Channel
- 4:27 – Pair Microphone To Receiver
- 5:32 – Set Volume Output
- 5:55 – Connect Receiver to Audio Mixer
- 6:06 – Don’t Use Mix Output
- 7:12 – Connect Receiver to Audio Mixer
- 7:58 – Audio Mixer Setup
- 9:14 – Foam Windscreen
- 9:55 – Rubber Stand
- 10:27 – Tonor TW820 Review
- 11:22 – Recommendation
- 12:36 – Final Thoughts
